Stainless Steel Welded Wire Mesh Panels Common Used Specification List
Mesh Opening		Wire Diameter (mm)	Panel Size
In inch	In metric unit (mm)
1/2"x1/2"	12.7mm x 12.7mm	1.0mm-2.0mm	-
1" x 1"	25.4mm x 25.4mm	1.5mm-2.5mm	3'x6' 4'x8',5'x10',6'x12' 7'x15',1mx2m,1.5mx3m,2mx4m and customized
1-1/2" x 1-1/2"	38.1mm x 38.1mm	2.0mm-5.0mm
2" x 2"	50.8mm x 50.8mm	2.0mm-6.0mm
3"x3"	76.2mm x 76.2mm	3.0mm-7.0mm
4"x4"	101.6mm x 101.6mm	3.0mm-8.0mm
5"x5"	127mm x 127mm	4.0mm-9.0mm
6"x6"	152.4mm x 152.4mm	4.0mm-10.0mm
3"x6"	76.2mm x 152.4mm	4.0mm-9.0mm
4"x6"	101.6mm x 152.4mm	4.0mm-9.0mm
Notes: other specification can also be made according to request

T-304 Stainless Steel – Standard Chemical Composition (in %)
Alloy	Carbon [C]	Manganese [Mn]	Phosphorus [P]	Sulfur [S]	Silicon [Si]	Chromium [Cr]	Nickel [Ni]	Iron [Fe]	Others, if Applicable
T-304 SS	0.08 Max	2.0 Max	0.045 Max	0.03 Max	1.00 Max	18.00–20.00	8.00–10.50	Balance	Nitrogen [N] = 0.10 Max

T-316 Stainless Steel – Standard Chemical Composition (in %)
Alloy	Carbon [C]	Manganese [Mn]	Phosphorus [P]	Sulfur [S]	Silicon [Si]	Chromium [Cr]	Nickel [Ni]	Iron [Fe]	Others, if Applicable
T-316	0.08 Max	2.00 Max	0.045 Max	0.03 Max	1.00 Max	16.00–18.00	10.00–14.00	Balance	Mo = 2.00-3.00, N = 0.10 Max

welded wire mesh sheets Feature:

Extra long lifetime, lasting years longer than Galvanized Before Weld products
Extreme strength, durability and resistance to rust, corrosion and harsh chemicals
Lowest long-term cost of ownership in harsh conditions (higher initial cost is offset by lower frequency of repair and replacement)
Ideal for hard-to-access areas where rust and corrosion are factors

welded wire mesh sheets Application:

· Infill panel & railing systems

· Industrial fan & machine guards

· Security enclosures

· Animal retention (cages)

· Small critter control

· Decorative signage

· Room dividers

· Wall cladding

· Ceiling panels

· Air vents & soffit screens

· Basket fabrication

· Food applications

· Racking & storage

· Aviary & bird screen

· Industrial separation

welded wire mesh sheets Packing:

Welded wire mesh in panel: are wraped with the shrinked plastic bag then packed in the pallets.
Welded wire mesh in rolI: are by water proof paper then shrinked plastic bag as ou negotiation.
Special packing is ok as your request .

● Each welded wire mesh roll wrapped with water proof paper.
● Welded wire mesh panel is pallets packing or in wooden case.

Inquiry Cart 0

4 Inch X 4 Inch Apeature 3mm Galvanised Wire Mesh 4 Feet By 8 Feet

Metal Mesh Fencing

Chain Link Mesh Fencing

Anti Climb Mesh Fence

Security Metal Fencing

Welded Steel Grating

Gabion Wire Mesh

Perforated Metal Mesh

Expanded Metal Mesh

Window Screen Mesh

Construction Wire Mesh

Stainless Steel Welded Mesh

Galvanised Welded Mesh

Woven Wire Mesh

Plastic Mesh Netting

Metal Farm Fence

Metal Hardware Products

Defensive Barrier

4 Inch X 4 Inch Apeature 3mm Galvanised Wire Mesh 4 Feet By 8 Feet

welded wire mesh sheets panels with 4 Inch x 4 Inch Apeature And 4 Feet by 8 Feet

welded wire mesh sheets Introduction:

welded wire mesh sheets Specification:

Specification:

The WD-278 is a square repeating ornamental welded wire mesh pattern consisting of 2 wires every 6 inches. A Standard 48”x96” panel consists of 8 patterns by 16 patterns. A standard 60”x120” panel consists of 10 patterns by 20 patterns.

PERCENT OPEN:87.60%

OVERALL THICKNESS:0.384 inches

ASPECT RATIO:1.00:1

WEIGHT:0.79 lbs./sq. ft.

OPENING LIMITATION:3.808 inches

PANEL SIZES:48”x96" and 60”x120”

Stainless Steel Welded Wire Mesh Panels Common Used Specification List

Mesh Opening

Wire Diameter (mm)

Panel Size

In inch

In metric unit (mm)

1/2"x1/2"

12.7mm x 12.7mm

1.0mm-2.0mm

-

1" x 1"

25.4mm x 25.4mm

1.5mm-2.5mm

3'x6' 4'x8',5'x10',6'x12' 7'x15',1mx2m,1.5mx3m,2mx4m and customized

1-1/2" x 1-1/2"

38.1mm x 38.1mm

2.0mm-5.0mm

2" x 2"

50.8mm x 50.8mm

2.0mm-6.0mm

3"x3"

76.2mm x 76.2mm

3.0mm-7.0mm

4"x4"

101.6mm x 101.6mm

3.0mm-8.0mm

5"x5"

127mm x 127mm

4.0mm-9.0mm

6"x6"

152.4mm x 152.4mm

4.0mm-10.0mm

3"x6"

76.2mm x 152.4mm

4.0mm-9.0mm

4"x6"

101.6mm x 152.4mm

4.0mm-9.0mm

Notes: other specification can also be made according to request

T-304 Stainless Steel – Standard Chemical Composition (in %)

Alloy

Carbon [C]

Manganese [Mn]

Phosphorus [P]

Sulfur [S]

Silicon [Si]

Chromium [Cr]

Nickel [Ni]

Iron [Fe]

Others, if Applicable