ITEMS #	Block width	Mesh width	Weight(KGS)	PACKING
QJM2	4''	2''	0.57	50PCS/BDL,20BDL/PALLET
QJM4	6''	4''	0.61	50PCS/BDL,20BDL/PALLET
QJM6	8''	6''	0.64	50PCS/BDL,20BDL/PALLET
QJM8	10''	8''	0.68	50PCS/BDL,20BDL/PALLET
QJM10	12''	10''	0.71	50PCS/BDL,20BDL/PALLET

Standard Length	Width	Finishes
10’(3.05m)	2”(50mm)	Uncoated Electro Galvanized Hot Dipped Galvanized After Fabrication Stainless Steel
	4”(100mm)
	6”(150mm)
	8”(200mm)
	10”(250mm)
All products conform to: ASTM A641 - (Electro galvanized ) ASTM A153 Class B2 - (Hot dipped after fabrication) ASTM A 82 - (Cold drawn steel wire) Tensile Strength:80,000 PSI;Yield Point:70,000 PSI minimum;Reduction of Area:30 %. ASTM A951-96 - (Masonry wall reinforcing) ASTM 580 Type 304 - (Stainless steel)

Truss Type Block Reinforcement Mesh Specification

Reference	Width (mm)	Thickness (mm)	Length (mm)	Material
TM 50 S	50	3/4/5	3000	Galvanised steel
TM 100 GS	100	3/4/5	3000	Galvanised Steel
TM 150 GS	150	3/4/5	3000	Galavanised Steel
TM 200 GS	200	3/4/5	3000	Galavanised steel
TM 50 SS	50	3/4/5	3000	Stainless steel
TM 100 SS	100	3/4/5	3000	Stainless steel
TM 150 SS	150	3/4/5	3000	Stainless steel
TM 200 SS	200	3/4/5	3000	Stainless Steel

Ladder Type Block Reinforcement Mesh Specification

Reference	Width (mm)	Thickness (mm)	Length (mm)	Material
LM 50 GS	50	3/4/5	3000	Galvanised steel
LM100 GS	100	3/4/5	3000	Galvanised steel
LM 150 GS	150	3/4/5	3000	Galvanised steel
LM 200 GS	200	3/4/5	3000	Galvanised Steel
LM 50 SS	50	3/4/5	3000	Stainless steel
LM 100 SS	100	3/4/5	3000	Stainless Steel
LM 150 SS	150	3/4/5	3000	Stainless steel
LM 200 SS	200	3/4/5	3000	Stainless Steel

Masonry wall reinforcing Feature :

* Greatly reduces cracking that can arise from thermal stresses. This enhances resistance to water penetration, as cracks are controlled.

* Increases lateral flexural strength.

* Bonds exterior and interior masonry wythes together in composite or cavity walls. Also bonds masonry at intersecting walls and corners

* Increases elasticity and performance of masonry walls under various stresses

(1)Light in weight ,high intensity, huge loading capacity as well as good anti-earthquake capacity.

(2)Simple in construction operation, easy to install.

(3)Can act as a part of the structure of weight bearing, to reduce the cost of material.

(4)Put the panel above the welded wire net fill cement between them.

(5)This type of floor decking sheet has the strong friction between the concrete and floor slab, being fire resistant.

(6)This deck is connected with steel bar ,making it have the higher strength.

Masonry wall reinforcing Application:

Concrete slabbing, roads, paving, foundations, marine work, bank strong rooms, partition slabs, concrete block work, asphalt guttering and so on

1. steel truss applied to precast slabs, pre-high-speed railway sleeper.

2. Used in many high-rise, ultra- high-rise steel buildings

3. Used for steel building, mezzanine floor of “LOFT”

4. The force applied to the complex, special-shaped structure, building

5. Used in-situ concrete structure(RC) buildings

6. Used in the construction of slope roof structure

80000 PSI Block Reinforcement Mesh Hot Galvanized Mesh Masonry

Metal Mesh Fencing

Chain Link Mesh Fencing

Anti Climb Mesh Fence

Security Metal Fencing

Welded Steel Grating

Gabion Wire Mesh

Perforated Metal Mesh

Expanded Metal Mesh

Window Screen Mesh

Construction Wire Mesh

Stainless Steel Welded Mesh

Galvanised Welded Mesh

Woven Wire Mesh

Plastic Mesh Netting

Metal Farm Fence

Metal Hardware Products

Defensive Barrier

80000 PSI Block Reinforcement Mesh Hot Galvanized Mesh Masonry

Wall Construction ASTM A951 Standard Wire Diameter 3/16" Masonry wall reinforcing

Masonry wall reinforcing Introduction:

Masonry Reinforcement Mesh is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry.

It is manufactured in 10′ 8″ lengths from wire conforming to ASTM A 82 / A82M for cold drawn steel wire.

It consists of two or more parallel and deformed longitudinal wires welded to a perpendicular cross wire spaced 16″ O.C. Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.

Masonry wall reinforcing Standard Specification:

* 4” wall - 16” wall * Other widths available on special request * (S) Standard: 9 ga. side rods x 9 ga. cross rods * (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods * (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods

*Tensile Strength - 80,000 psi *Yield Point - 70,000 psi

ITEMS #

Block width

Mesh width

Weight(KGS)

PACKING

QJM2

4''

2''

0.57

50PCS/BDL,20BDL/PALLET

QJM4

6''

4''

0.61

50PCS/BDL,20BDL/PALLET

QJM6

8''

6''

0.64

50PCS/BDL,20BDL/PALLET

QJM8

10''

8''

0.68

50PCS/BDL,20BDL/PALLET

QJM10

12''

10''

0.71

50PCS/BDL,20BDL/PALLET

Standard Length

Width

Finishes

10’(3.05m)

2”(50mm)

Uncoated

Electro Galvanized

Hot Dipped Galvanized After Fabrication

Stainless Steel

4”(100mm)

6”(150mm)

8”(200mm)

10”(250mm)

Truss Type Block Reinforcement Mesh Specification

Reference

Width (mm)

Thickness (mm)

Length (mm)

Material

TM 50 S

50

3/4/5

3000

* 4” wall - 16” wall
* Other widths available on special request
* (S) Standard: 9 ga. side rods x 9 ga. cross rods
* (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods
* (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods

Tensile Strength - 80,000 psi
Yield Point - 70,000 psi